Handi-Foam Two-Component Standard Foams are ideal for Insulating and Sealing jobs that require a product designed for spray application over large surface areas or for filling large voids and gaps. Handi-Foam Two-Component Foam is a chemically cured foam system. Each Foam pack includes both an “A” & “B” component. Dispensed through the included dispensing tool, the foam “A” and its curing agent “B” are mixed at the nozzle and cure much more quickly than One-Component Foams. Since Two-Component Foams do not rely on moisture in the air in order to cure they can be used to fill large spaces and voids or sprayed on walls and in cavities without concern for delays in curing and hardening. Unlike most spray foams, Handi-Foam is closed cell foam. This closed cell design offers not only excellent insulation and draft sealing but also serves as an air and vapor barrier, discouraging the development of mold and mildews.

All Handi-Foam Two-Component foams have an expansion ratio of up to 8:1 and carry an R-value of 6-7 per inch of cured foam. They range in density from 1.75 to 2.0 lbs per cubic ft. and can resist a temperature range of –200 F to +200 F. All Two-Component foams will cure tack-free in less than a minute, can be trimmed and cut in 2-5 minutes and are completely cured in several hours. Foam yield is best when the foam container contents are properly warmed to a range of 75F-85F. Foam can be trimmed, sanded and painted. Foam is not UV resistant unless painted or stained. All Handi-Foam products are completely free of any VOC’s,CFC’s and formaldehyde.

Every Handi-Foam Two-Component Kit includes everything you need to successfully apply foam. This includes pre-pressurized containers, hoses and the Handi-Gun Dispensing Gun. Each kit also comes with a pack of 8 disposable nozzles so the user can replace nozzles as needed while using the foam. Extra nozzles are available. The number included in each kits description indicates how many “Board Feet” it will cover. For example, a Handi-Foam II-205 Kit will dispense enough foam to cover 205 board feet. A board foot equals an area 12” x 12” x 1” thick of cured foam. Two-Component Foam kits are available in a variety of specialty formulations designed to work perfectly for every insulating, filling and sealing need. Please review our Two-Component Products and Applications section to determine the Handi-Foam Spray Kit best suited for your job.

Ideal Applications for Handi-Foam Two-Component Standard Spray Foam Kits
 

- Insulating Wall Cavities (R-21 plus in a 2 x 4 stud wall)

- Insulation, Moisture Control for Agricultural Buildings, Silo’s, Potato Barns etc.

- Insulating Cooler walls and doors, Cold Storage facilities

- Repair and Replace insulation for Hot Tubs, Spas. (UL-94 Rated)

- Soundproofing and Insulating HVAC ducts and pipes.

- Complete Insulation, air and vapor barrier in one product.

- Block out Vermin & Insects, seals gaps and cracks

- Soundproofing and Sound Deadening